Rosette metal flower-shaped chrome color 120mm seven holes
Secure payment
100% secure payment. Your data is transmitted in encrypted form.
Delivery
Fast shipping and order tracking.
Returns
Returns and after-sales support according to our terms.
Ceiling support for pendant lamps
Chrome color
Made of metal
Composed of the base, a rear metal bridge, two screws for proper fastening, and seven transparent cable clamps
It incorporates seven holes for passing decorative electrical cables with a maximum section of 2x1.5mm, as well as clamps or cable clamps, nuts or sleeves
Cable not included
Also valid as a base for a wall sconce
Ideal for concealing electrical connections and providing a decorative finish to the luminaires
Easy assembly and installation
Data sheet
Specific References
feedback Report comment
check_circle Report sent
error Your report cannot be sent
Write your review
check_circle Review sent
error Your review cannot be sent
Black metal support with a diameter of 120mm and seven outlets
Ceiling support for pendant lampsMatte black colorMade of metalComposed of the base, a rear metal bridge, two screws for proper fastening, and seven black cable clampsIt...
Black metal support with a 120mm diameter and two outlets
Ceiling support for pendant lampsMatte black colorMade of metalComes with a base, a metal back bridge, two screws for proper fastening, and two black cable clampsFeatures two...
Wooden support 88 mm in diameter x 30 mm in height with 4 lateral outlets
Ceiling support with multiple side outlets and 88mm diameterMade of woodConsists of the base, a rear metal bridge, and two screws for proper fasteningIt includes 4 side holes...
Iron support for painting with a 100mm diameter and three outlets
Ceiling support for pendant lampsMade of raw ironConsists of the base, a metal back bridge, and two screws for proper fasteningFeatures 3 holes for passing decorative electrical...
Bright chrome metal support, 100mm in diameter and with three outlets
Ceiling support for hanging lampsHigh gloss chrome colorMade of metalConsists of the base, a rear metal bridge, and two screws for proper fasteningFeatures three holes that...
Black metal support with a 120mm diameter and six outlets
Ceiling support for pendant lampsMatte black colorMade of metalConsists of the base, a rear metal bridge, two screws for proper fastening, and six black cable clampsIt includes...
Round metal support kit 200mm diameter with 7 holes
Round ceiling rose 200 mm with 7 holes and side entries The 200 mm round ceiling rose with 7 top holes and 4 side entries is designed for creating multi-drop pendant lights,...
Brass metal support, 120mm in diameter with two outlets.
Ceiling support for pendant lampsSatin brass colorMade of metalComes with a base, a metal back bridge, two screws for proper fastening, and two black cable clampsFeatures two...
Customers who bought this product also bought:
Metal prisoner cylinder, brass color, 10/100 with screw.
Stud accessory for fixing lampsBrass colorMade of brassIt has a top hole of 7mm without thread and a bottom hole with a 10/100 threadIdeal for passing the decorative cable...
150mm dock for balls and tulips with a hole of 80/100mm
Spring clamp for holding ballsMade of metalWorks by pressure and attaches to the rest of the system through its central hole with a 10mm diameterEasy installationIdeal for...
Adapter for embedding a lamp on wooden dowels
1.0 This piece is a hollow screw that allows us to turn a wooden dowel or log into a lampIt has grooves on the outside, and a female metric 10/100 thread on the insideIt is...
Clutch piece wire clamp to be fastened with steel cable
Clutch brake for steel cableMade of steelFeatures a threaded hole with a 10/100 pitch on one endHas a side opening for the steel cableIdeal for stopping the steel cable of a...
Back pressure plate raw iron 42mm x 8mm
Back metal plate with relief in raw ironIt is used to adapt holes of 40-42mm to reduce them to 10mm pitchMeasurements: 42mm effective inner diameter x 8mm effective inner height...
Plastic and metal cable clamp 10/100
Stud accessory for fixing lampsMade of thermoplastic and metalConsists of a cylinder with a 10/100 (15mm) metal thread on one end and a clamp on the other endIdeal for passing...
Black balloon cover cap 60.5mm diameter x 2mm
Black decorative cover for balloons that require attachment with springsRequires the use of springs for installation with balloons or glass tulipThis type of glass tulips or...
120mm dock for balls and tulips with a 55/60mm hole.
Spring clamp for holding ballsMade of metalWorks by pressure and attaches to the rest of the system through its central hole with a 10mm diameterEasy installationIdeal for...
Rosette metal flower-shaped chrome color 120mm seven holes
check_circle
check_circle
error Your review appreciation cannot be sent