Brass globe holder cap 115mm diameter x 10mm

Decorative brass cap for balloons that require attachment with springsRequires the use of springs for installation with balloons or glass tulipThis type of glass tulips or...

Brass globe holder cap 90mm diameter x 5mm

Decorative brass cap for balloons that require attachment with springsRequires the use of springs for installation with balloons or glass tulipThis type of glass tulips or...

Brass flagpole holder 129mm x 24mm with screws

Decorative brass holder for tulip shades that require screw fixationThese types of glass tulips or globes have a protruding neck with a concave shapeIncludes three side screwsAt...

Black metal support, 400mm long x 50mm wide

Ceiling support for pendant lampsMatte black colorMade of metalComposed of the base, a rear metal bridge, and two screws for proper fasteningYou can choose the number of holes...

Black metal support, 600mm long x 50mm wide

Ceiling support for pendant lampsMatte black colorMade of metalComposed of the base, a rear metal bridge, and two screws for proper fasteningYou can choose the number of holes...

Black metal support 800mm long x 50mm wide

Ceiling support for pendant lampsMatte black colorMade of metalComposed of the base, a rear metal bridge, and two screws for proper fasteningYou can choose the number of holes...

Ceiling brass support strip of 440mm x 22mm x 16mm

Ceiling support for pendant lampsMade of brassConsists of the base, a metal backplate, and two screws for proper installationYou can choose the number of holes through the...

Brass ceiling support strip of 330mm x 22mm x 16mm

Ceiling support for pendant lampsMade of brassConsists of the base, a metal backplate, and two screws for proper installationYou can choose the number of holes through the...

Concave brass candle snuffer, 100mm in diameter x 15.7mm.

Concave cover with a 100mm diameter for holding balls that do not have any type of neck or burr.This cover is not suitable for balloons that are not completely smooth at the...

Bell brass 76mm high x 300mm diameter

Bell metal screen finished in brass, 76mm x 300mmAt the top, it has a 10mm drill hole to be able to attach it to studs, cable glands, ball joints, or other accessoriesATTENTION:...

Brass base for table lamp 180mm x 165mm

Metallic base for table or floor lampsColor: brassMade of brassConsists of a brass base and a sub-base made of raw ironFeatures a central hole and a lateral hole, allowing the...

Brass lamp distributor with 3-arm outlets and 60mm.

Accessory for mounting and restoring antique arm lampsConsists of three outlets and a central input. The latter has a 10mm diameterThe branches are used to provide output to the...

Brass lamp distributor with 4-arm outputs and 60mm.

Accessory for mounting and restoring antique arm lampsConsists of three outlets and a central input. The latter has a threaded 10/100 passageThe branches are used to provide...

Brass lamp holder cover, 92mm diameter x 6mm

Decorative brass cap for balloons that require attachment with springsRequires the use of springs for installation with balloons or glass tulipThis type of glass tulips or...

Brass globe holder cap 76mm diameter x 3mm

Decorative brass cap for balloons that require attachment with springsRequires the use of springs for installation with balloons or glass tulipThis type of glass tulips or...

Brass metal foot 123 mm in diameter x 26.2 mm in height

Metallic base for table or floor lampsColour: brassMade of brassDimensions: 123mm in diameter x 26.2mm in heightConsists of a base and a lower metal piece in raw ironFeatures a...

Brass base for lamps with off-center hole

Metal base for table or floor lampsBrass colorMade of brassConsists of a brass base and a sub-base made of raw ironFeatures an offset hole and a side hole, allowing for the...

Final decorative cylindrical brass stopper, 7.8mm in height

Top final ornament made of brassThe bottom part has a threaded 10/100 pitchIdeal as a cylindrical tube end capHeight of 7.8mm

Decorative cylindrical brass end stop with a height of 5.7mm.

Top final ornament made of brassThe bottom part has a threaded 10/100 pitchIdeal as a final stopper for cylindrical tubeHeight of 5.7mm

Five-way lamp mounting piece, 24mm high

Derivative accessory type tacoMade of raw brassIncorporates two holes, one at each end and three central ones with universal thread 10/100 pitchIdeal for mounting arm lamps as...

White metal support 1000mm long x 35mm wide

Ceiling support for pendant lampsColor whiteMade of metalComposed of the base, a rear metal bridge, and two screws for proper fasteningYou can choose the number of holes through...